FPL vs. LCEC Electric Bill Calculator: What Your Usage Really Costs

Most people in Southwest Florida have no idea what a kilowatt-hour costs them. They know the number at the bottom of the bill, they know it went up, and they have a vague sense that the other utility across the county line is either a lot better or a lot worse. Usually they have that backwards, or at least half wrong.

So I built an FPL vs. LCEC electric bill calculator. Type in your monthly kWh and it shows what the same usage costs on each utility’s standard residential rate. Or flip it around: type in a bill amount and it backs out how many kWh that bill actually bought. Both directions, both utilities, using the rates in effect as of November 2026.

Play with it for a minute before you read the rest. The results are not what most people expect.

What the Calculator Uses

For FPL, the calculator uses the RS-1 residential rate. That is a $10.52 monthly customer charge plus an energy rate that steps up after 1,000 kWh. I use the all-in number per kWh, not the base energy charge alone. FPL’s bill stacks base energy, fuel, conservation, capacity, environmental, storm protection, and a small transition credit. Add those up and you get about 12.26 cents per kWh for the first 1,000 kWh and about 14.26 cents above that.

That distinction matters. I see calculators and sales pitches all the time that quote a single line item from the tariff and call it the rate. It makes every savings projection look better than reality. If someone tells you FPL power costs 8 cents, they are reading the base energy line and ignoring the rest of your bill.

FPL also has a $30 minimum bill. If your customer charge plus energy comes in under $30, you pay $30 anyway. The calculator handles that. In practice it means roughly the first 159 kWh of any month costs you the same $30 whether you use them or not.

For LCEC, the calculator uses the RS residential rate from LCEC’s 2026 tariff: a $20.00 customer charge and three energy tiers. The first 500 kWh run 11.29 cents, the next 500 run 12.06 cents, and everything over 1,000 kWh runs 12.82 cents. On top of that is LCEC’s Power Cost Adjustment, which changes every month.

Both are single-phase residential rates. If you have three-phase service, a commercial account, or a time-of-use rate, this calculator is not for you.

The LCEC Power Cost Adjustment Is the Wild Card

LCEC buys its power wholesale and passes the swings in that cost straight through to members with the Power Cost Adjustment, or PCA. It is a per-kWh charge, and in 2026 it has been all over the place. It was under a penny per kWh in January, climbed past 3.2 cents in May, and fell back to about half a cent by November.

Three cents does not sound like much until you multiply it. At 1,500 kWh, the difference between the November PCA and the May PCA is about $40 on a single bill. Same house, same thermostat, same family, and the bill moves $40 because of what LCEC paid for wholesale power that month.

FPL has fuel costs too, and they change. But FPL folds fuel into a charge that is set for the year and adjusted far less often, so FPL bills move mostly with your usage. LCEC bills move with your usage and with the wholesale market.

That is why the calculator lets you edit the LCEC PCA. It defaults to the November 2026 figure. If you want to see what your bill looked like in May, or you want a more conservative average, open the taxes and fees section and change it. LCEC publishes the monthly PCA on its rates page.

So Which Utility Is Cheaper?

At typical Southwest Florida usage, FPL. Not by a mile, but consistently.

At 1,000 kWh a month, the FPL bill is about $133 before taxes. The LCEC bill with the November PCA is about $142. Use LCEC’s average PCA for 2026 so far and it is closer to $150. At the May PCA, it is about $169.

At 1,500 kWh, which is a normal summer month for a lot of homes here, FPL comes in around $204 and LCEC around $209 at the November PCA, $220 at the year’s average.

Here is where it gets interesting. FPL charges a penalty rate for usage over 1,000 kWh, two full cents more per kWh. LCEC’s top tier is less than a penny above its middle tier. So the gap closes as usage climbs. At the November PCA, LCEC actually becomes the cheaper utility at roughly 1,970 kWh a month and stays cheaper above that. At 2,500 kWh, LCEC is about $5 less.

But that crossover only exists when LCEC’s PCA is low. Plug in the 2026 average and FPL wins at every usage level you are likely to see. Plug in May and it is not close.

The other edge case is the very low end. Below about 85 kWh a month, LCEC is cheaper because FPL’s $30 minimum bill is higher than LCEC’s $20 customer charge plus a sliver of energy. That matters to almost nobody except a seasonal resident with the house shut down for the summer, a detached garage meter, or a home with a lot of solar. Which brings me to the part I actually care about.

Why This Matters If You Are Thinking About Solar

I size solar systems from twelve months of real usage, not from a bill amount someone remembers. But a lot of people start the conversation with “my bill is about $250,” and that number alone tells me less than they think. Is that with or without taxes and fees? Which utility? Which month? Was that the May LCEC bill or the November one?

The reverse side of the calculator is for exactly that. Enter $250 and it tells you that is roughly 1,820 kWh on FPL, and almost exactly the same on LCEC at the November PCA. In May, that same $250 would have bought LCEC customers a few hundred kWh less. Now you have a starting point that means something.

The minimum bill and customer charge also explain why solar never takes your bill to zero. FPL keeps $30 a month no matter how much you produce. LCEC keeps its customer charge. I wrote a whole post on why you still get an electric bill with solar panels, and the fixed charges are the heart of it. Oversizing a system to chase a zero bill just buys panels whose output gets paid out at the low wholesale rate at year end.

That is also why the calculator has a Net metered (solar) button. LCEC does not bill solar homes on the tiered residential rate. It moves them to a separate Net Metering Rider with a $22.22 customer charge and one flat energy rate of 8.21 cents plus the PCA, with no tiers. I covered why that matters in LCEC’s rate structure quirk that saves solar customers hundreds a year. FPL keeps net metered homes on the same RS-1 rate, so the FPL side does not change.

Turn the button on and the kWh box means net kWh: what you pulled from the grid minus what your panels sent back. The difference is striking. At 1,000 net kWh, LCEC comes in around $110 and FPL around $133. Flip the button off and FPL is the cheaper utility at the same usage. Months where your solar sends back more than you use carry a credit forward, and the calculator does not show those.

Same goes for FPL budget billing. If you are on it, the number on your bill is an averaged payment, not what you used that month, so do not feed it into the reverse calculator. And if you are going solar on FPL, cancel budget billing yourself once net metering is approved. FPL will not do it for you.

What About Taxes and Fees?

The calculator shows bills before taxes and fees by default, and I did that on purpose.

Your actual bill adds some combination of a gross receipts tax, a franchise fee, and in many cities a municipal public service tax. Which ones apply, and at what rate, depends on whether you live in a city or unincorporated county and which city it is. Two neighbors on opposite sides of a city limit can pay different tax amounts on identical usage. Any single default I picked would be wrong for most readers.

So the calculator gives you a box to enter your own taxes and fees percentage. The easy way to get it: add up the tax and fee lines on a recent bill and divide by the electric charges above them. If the taxes total $14 on $160 of charges, enter 8.75. The calculator applies that to the forward estimate and backs it out on the reverse side, so a $250 bill with your real tax rate turns into an accurate kWh figure.

If you leave it at zero, just remember the number you see is lower than what you will pay.

Using the Reverse Calculator

Switch to “I know my bill” and type in a dollar amount. For each utility you get the kWh that bill represents and the effective average cost per kWh, including the customer charge spread across your usage.

A few situations where this is useful:

You are buying a house and the seller says the electric bill runs about $200. You can turn that into kWh and compare it against what a house that size should use. If the number seems high, ask why. Old air handlers, a pool pump running 24 hours a day, and attic ductwork with a leak are the usual suspects.

You are moving between FPL and LCEC territory. Cape Coral and North Fort Myers are LCEC. The city of Fort Myers and Naples are FPL. Take your current bill, back out the kWh, then flip to the forward calculator to see what the same usage costs on the other side of the line.

You are comparing a solar quote against your own bills. If a salesperson tells you your system will offset a $300 bill, back that into kWh and ask how much the system will produce per year. If the two numbers are not in the same neighborhood, the quote is built on a guess.

If the bill you enter is below the floor, the calculator tells you. On FPL, any amount under $30 is impossible, and anything right at $30 could mean anywhere from zero to about 159 kWh. On LCEC, anything under the $20 customer charge cannot happen.

The Fine Print

Rates change. FPL’s base rates are set under a multiyear plan approved by the Public Service Commission, and LCEC adjusts its PCA every month. I set the calculator to the published rates as of November 2026 and will update it when the tariffs move. You can check LCEC’s current numbers yourself in the LCEC 2026 rate tariff.

The calculator also ignores things that show up on some bills: late fees, deposits, surge protection or lighting add-ons, and any one-time credits. And it assumes a full billing month. A 34-day cycle uses more kWh than a 28-day cycle, and both utilities bill the cycle you actually got.

Your bill is the final word. This is a tool for understanding it, not replacing it.

The Bottom Line

For most Southwest Florida homes without solar, FPL’s standard residential rate costs less than LCEC’s at the same usage, mostly because of LCEC’s higher customer charge and its Power Cost Adjustment. The gap is small when LCEC’s PCA is low and wide when it spikes. Heavy users above roughly 2,000 kWh a month can come out ahead on LCEC, but only in low-PCA months. Net metered solar homes are the reverse: LCEC’s flat net metering rate beats FPL once net usage tops about 330 kWh a month.

Use the FPL vs. LCEC electric bill calculator to turn your kWh into a real bill comparison, or your bill into real kWh. Enter your own tax percentage if you want the numbers to match what you pay. And if you are thinking about solar, send us twelve months of usage instead of a bill amount. We will size the system to how you actually use power, on whichever utility you have.

Leave Your Comment


The reCAPTCHA verification period has expired. Please reload the page.

Share the post

Related Solar Education Article