Got FPL Net Metering Approval? Call FPL and Cancel Budget Billing Yourself

When FPL approves your net metering application, a lot changes on your account. You get a new bidirectional meter, and your bill starts tracking the energy you pull from the grid and the energy you send back. One thing does not change: budget billing. If you were on FPL’s budget billing plan before solar, you are still on it the day after you get permission to operate, and FPL will keep drafting the same averaged payment every month until you pick up the phone and cancel it yourself.

Nobody at FPL is going to do it for you. The interconnection team approves your system. The billing side keeps billing. The two do not talk to each other about your payment plan, and the result is a solar owner paying a pre-solar bill for a post-solar house.

What Budget Billing Actually Does

Budget billing is a payment smoothing program. FPL looks at your recent usage history, works out an average, and charges you that average every month instead of your actual bill. Summer bills come down, spring and fall bills go up, and the payment stays roughly the same all year.

Your actual charges do not disappear. FPL still calculates the real bill every month. The difference between what you paid and what you actually owed is tracked in the background as a running balance, and FPL adjusts your payment over time to work that balance out.

For a house without solar, that is a reasonable trade. Your usage moves with the seasons, but the pattern repeats year after year, so the average is a fair predictor of the next twelve months.

Why It Falls Apart the Day Your Solar Turns On

Solar breaks the one assumption budget billing depends on: that next year looks like last year.

Your budget amount was built from usage history with no solar in it. The day your system goes live, your net usage drops hard. In a strong spring month in Southwest Florida, a well-sized system can take a house that used to pull 1,500 kWh from the grid down to a few hundred kWh net, or even into surplus. Your actual bill falls to a fraction of what it was.

Your budget payment does not. It is still charging you for the old house. I covered the general mismatch in an earlier post on why budget billing doesn’t work with net metering. This post is about the part that catches people every single time: what happens on your account after FPL approves net metering, and what you have to do about it.

 

FPL Does Not Turn It Off for You

Here is the sequence most people expect. FPL approves the interconnection, swaps the meter, and moves the account onto net metering. Surely that process also takes you off a payment plan that makes no sense with solar.

It does not. Net metering approval changes how your energy is measured and credited. It does not touch how you pay. Budget billing is a separate payment arrangement on your account, and it stays in place until you cancel it.

Why FPL does not cancel it automatically when net metering is approved is beyond me. It would be a single checkbox in their system. But that is not how it works today, so the responsibility falls on you. If you want to understand what actually happens between installation and approval, here is our walkthrough of the FPL interconnection process and permission to operate. Budget billing is simply not part of that process.

Two Different Credits on the Same Bill

This is where the confusion really sets in, because a solar owner on budget billing ends up with two completely different kinds of credit on the same account.

Net metering credits are energy. They are kilowatt-hours. When your panels send more to the grid than you pull from it in a billing month, the surplus rolls forward as kWh to cover future months. On the December bill, the year closes out and any leftover kWh are cashed out at a low wholesale rate.

A budget billing overpayment is money. It is dollars you paid that you did not owe, because your budget amount was set for a house without solar. It builds up as a credit balance on your account, completely separate from your kWh bank.

Owners see “credit” on the bill and assume it is their solar at work. Sometimes it is. Often, at least in part, it is their own cash sitting at FPL. If you want a line-by-line guide to what you are looking at, here is how to read an FPL net metering bill.

What It Looks Like in Real Life

Here is a simplified example. The numbers are round on purpose, but the pattern is exactly what we see.

A home used about 1,600 kWh a month before solar, and the budget payment was set around $210. The system gets approved in March. In April and May, the house nets a few hundred kWh from the grid each month, and the actual bill drops to somewhere around $50 to $60 once FPL’s fixed charges are included.

The budget payment keeps drafting $210. That is $150 or more in overpayment every month. Six months in, the account is carrying close to $1,000 that the homeowner paid for nothing. On autopay, they may never notice. The payment amount looks familiar, so nobody looks closer.

Eventually FPL’s periodic review starts lowering the budget amount, because the history now includes solar months. But that adjustment trails reality by months, and in the meantime the money is FPL’s to hold, not yours to use.

Try it with your own numbers. Set your home’s usage, your system size, and the month FPL approved net metering, then slide the last control to see what waiting to call FPL actually costs you.

Budget Billing Also Hides the Answer to “Why Do I Have a Bill?”

There is a second problem, and it runs the other direction.

Budget billing smooths away exactly the signal a solar owner needs to see. If your usage creeps up, from an EV, a pool heat pump, a family member moving in, or an air conditioner losing efficiency, your actual bills climb. On budget billing, you do not see it. The shortfall piles up in the background balance, and you find out when FPL raises your payment or settles the difference.

When a solar owner calls us confused about their FPL bill, the first question we ask is whether consumption went up. The second is whether they are on budget billing. Between those two questions, we solve almost every case. We just walked through one of those consumption cases in detail in Why Am I Getting an Electric Bill With Solar Panels, including the running-total chart your monitoring app will never show you.

With budget billing off, your bill tells you the truth every month. That is the whole point of having it off.

How to Tell If You Are on Budget Billing

Plenty of people signed up years ago and forgot. Others were enrolled when they set up autopay and never thought about it again.

Look at your FPL bill for budget billing language near the amount due, or a line showing your budget amount alongside your actual charges. If the amount you pay is the same, or nearly the same, every single month while your solar production swings with the seasons, that is a strong hint. You can also check your payment options in your FPL online account.

If you cannot tell, call FPL and ask.

What to Do After FPL Approves Net Metering

Make this part of your solar startup checklist, right next to setting up your monitoring app.

Confirm net metering is active. Your bill should show energy delivered and energy received. If it still looks like a standard residential bill with no received energy, the account has not been switched yet, and that is a separate call.

Call FPL and cancel budget billing. Use the customer service number on your bill. Ask them to remove budget billing from your account, and ask them to confirm it is removed.

Ask about any balance. Ask what happens to your current budget balance when the plan ends, whether it is a credit or an amount owed, and how it will show up on your next bill. It is your money either way, and you should know where it went.

Check your next bill. The amount due should now reflect your actual net usage for that month. It will move with the seasons. That is correct. A bill that changes is a bill that is telling you what is happening.

If you are planning a system now, you can make the call before installation instead. There is no reason to stay on budget billing once you know solar is coming.

If you already have solar and just realized you have been on budget billing the whole time, do not panic. You have probably been overpaying, not losing money. Call FPL, cancel it, and ask how the overpayment will be applied.

The Bottom Line

Budget billing and net metering do not belong on the same FPL account, and FPL will not separate them for you. Net metering approval does not cancel budget billing. You have to call FPL and cancel it yourself, or you will keep paying a pre-solar budget amount and quietly build a large credit balance on your account while the bills stop telling you anything useful.

If you are an FSDG customer and are not sure where your account stands, ask us. If your system was installed by someone else and your FPL bill does not make sense, send us your monitoring data and a recent bill. We will tell you whether it is consumption, budget billing, or something that actually needs a service call. You can also read FPL’s own overview of net metering for customers.

Leave Your Comment


The reCAPTCHA verification period has expired. Please reload the page.

Share the post

Related Solar Education Article